• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Help! swp

#1
can someone explain this to me Swp cyclic travel 8
50-125, default setting: +80
Set the Swp cyclic travel 8° if the menu value is activated so that the
rotor blade located above the tail tube is as accurate as 8° by full rollover
stroke. To do this, the field must be selected (highlighted field)
so that the swashplate can be controlled and adjusted in direct mode
when gyro gain is switched off. This is the only mode in which the
travel can be set correctly.
It is very important that the travel is set correctly. It plays a major role
in terms of acquiring the correct gyro gain.
 

Merv

Well-known member
#2
I’m not a helli guy, my guess is shp = swashplate, they want you to set the cyclic, as opposed to the collective.
Someone with more knowledge needs to take it from here.