Do you guys have one of these?
ColoFlyer Active member Mar 13, 2023 #2 Here is a free one you can download and build from 13th Squadron, if that would work. AT6 Texan Motor: 2218 1180kV Brushless Motor ESC: 30-35A Battery: 3s 1800mah - 4s 2250mah Wingspan: 46 inches (1168.4mm) Center of Gravity: 2 7/8 (73 mm) from leading edge. Propeller: 9x6 - 10x4.5 www.13thsquadron.com
Here is a free one you can download and build from 13th Squadron, if that would work. AT6 Texan Motor: 2218 1180kV Brushless Motor ESC: 30-35A Battery: 3s 1800mah - 4s 2250mah Wingspan: 46 inches (1168.4mm) Center of Gravity: 2 7/8 (73 mm) from leading edge. Propeller: 9x6 - 10x4.5 www.13thsquadron.com
AIRFORGE Make It Fly! Moderator Mar 13, 2023 #3 @noahangel11 set up a site to preserve Vincent Unrau plans, including an AT-6. Direct link ---> AT-6 Texan Home page ---> LEGACY VINCENT RC FOAM BOARD PLANES Flite Test also has a Master Series T-6 SBK. (no plans) Flite Test MS T-6 Texan FT MS T-6 Texan Build Video Playlist
@noahangel11 set up a site to preserve Vincent Unrau plans, including an AT-6. Direct link ---> AT-6 Texan Home page ---> LEGACY VINCENT RC FOAM BOARD PLANES Flite Test also has a Master Series T-6 SBK. (no plans) Flite Test MS T-6 Texan FT MS T-6 Texan Build Video Playlist
C Clintonious Member Mar 13, 2023 #4 Addicted said: @noahangel11 set up a site to preserve Vincent Unrau plans, including an AT-6. Direct link ---> AT-6 Texan Home page ---> LEGACY VINCENT RC FOAM BOARD PLANES Flite Test also has a Master Series T-6 SBK. (no plans) Flite Test MS T-6 Texan Click to expand... …and hence the question in my original post! I should have just gone and looked. Hopefully I’ll have a chance to build one sometime!
Addicted said: @noahangel11 set up a site to preserve Vincent Unrau plans, including an AT-6. Direct link ---> AT-6 Texan Home page ---> LEGACY VINCENT RC FOAM BOARD PLANES Flite Test also has a Master Series T-6 SBK. (no plans) Flite Test MS T-6 Texan Click to expand... …and hence the question in my original post! I should have just gone and looked. Hopefully I’ll have a chance to build one sometime!