Retro Rocket EDF Thrust Vectoring for 70mm

Part Retro Rocket EDF Thrust Vectoring for 70mm 1.8

Please log in to download
Type
3D Print Files (STL, G-code, etc.)
I would like to give a special thank-you to @SP0NZ for helping with design changes, and testing the fit of the new Thrust Tube. (not to mention, letting me borrow his pictures to post here)

The new files are specifically designed to fit the FT Store purchased EDF. This version does not require glue, and will snap-lock into position, forming a secure connection to the EDF.

Also, the tolerances have been improved to allow for an almost friction-less joint, only requiring minimal sanding to clean up the seam. You can spend about 2 minutes sanding instead of half a day!

FT_Nozzle.stl & FT_Thrust Tube.stl are the new files specifically designed for the FT purchased EDF.


As seen on the FT Youtube Channel!



  • Screenshot 2024-03-20 074615.png
    Screenshot 2024-03-20 074615.png
    135.2 KB · Views: 0
  • Screenshot 2024-03-20 074736.png
    Screenshot 2024-03-20 074736.png
    289.6 KB · Views: 0
  • Screenshot 2024-03-20 081007.png
    Screenshot 2024-03-20 081007.png
    694.6 KB · Views: 0
  • Screenshot 2024-03-20 081034.png
    Screenshot 2024-03-20 081034.png
    514.8 KB · Views: 0
  • Screenshot 2024-03-22 095751.png
    Screenshot 2024-03-22 095751.png
    100.4 KB · Views: 0
Author
johnbecker31
Downloads
130
Views
3,578
First release
Last update
Rating
5.00 star(s) 5 ratings

Latest updates

  1. Retro Rocket EDF Thrust Vectoring for 70mm

    This update includes the original Retro Rocket Thrust Vector files, as well as the final release...
  2. Retro Rocket EDF Thrust Vectoring for 70mm

    Adding a thicker base to the FT_Thrust Tube.stl to prevent cracking during installation.
  3. Retro Rocket EDF Thrust Vectoring for 70mm

    I would like to give a special thank-you to @SP0NZ for helping with design changes, and testing...

Latest reviews

Nice! Printed 2. Test flight this wee
J
johnbecker31
How did it go?
thx,bro
Love it...