- Type
- 3D Print Files (STL, G-code, etc.)
This is a 3D printable, steerable nose gear, that is also modular in the way that it can be removed from the aircraft and replaced without damage to the airframe.
Print with 100% infill, and without the need for support.
uses 2.5mm music wire for the gear wire.
uses 5 wheel collars which can be purchased from amazon.
Amazon: Wheel Collars
Print with 100% infill, and without the need for support.
uses 2.5mm music wire for the gear wire.
uses 5 wheel collars which can be purchased from amazon.
Amazon: Wheel Collars