3d plane

Bryant Mack doing insane 3D stunts during a practice flight for The World RC Invitational. The World RC Invitational, featured 10 of the best RC pilots globally, including five world champions.

This should be an interesting build off to see what is possible with foam board. Personally, I find 3d and XA to be very fun, but extremely expensive. Even a ~50" airframe can run you up to 200$- not including electronics. Wouldn't it be great if we could build our own airframes for less than...

Hello from Kiev! I want to share with you my little project. This Extra 300, or just similar to it. Wing design is FT Mustang pattern, but with some changes. Tail - redraw of FT Mustang too. Fuselage - redrawing or FT Spitfire, but a little shorter (about 1inch maybe). This is how you can use FT...

Josh should build a larger high performance FT3D. On a side note I'd be happy to give some tips for designing an FT3D V2. I've been working on my own 3D Plane for the last year (originally based on the FT3D). It features some drastic design changes which improve overall performance and lower...

Check out my Youtube channel.. It has some great fixed wing content showing scratch built designs epic crashes and RC product recommendations. Please subscribe I will be posting more crash/close call videos in the future. https://www.youtube.com/watch?v=12VjfU1DnCs&t=25s

I've always wondered what it would be like to do a build log, and know how much reading other build logs has helped me with my builds/decisions, so here it is! Now that that is out of the way, I'll get to the main topic of this thread. I have always wanted to build a plane that is at least...

I've been busy trying to do something in honor of my son Colin for Autism Awareness Month. He's days away from being 6 and is not quite ready for RC, but as apart of his Autism he LOVES fans and, as you might guess,...propellers! I can remember several years ago, as he came home from...

There are some pretty amazing people in the world. And doing the podcast has connected me with some many. One gentleman named Scott from Australia decided I needed a challenge. I needed to fly 3D. This stemmed from the fact back in the fall of 2015 we were having access issue to where I...

Hi, I am thinking about getting a 3D plane and am looking for some recommendations. I want one that is very durable, is made of foam, can fly very slowly, can high alpha, hover, do harriers, do rolling harriers, has at least a five minute flight time, can be flown outside with 10 mph wind, costs...

While at Flite Fest back in July Chris from the After Hours Podcast tossed his 3DHS plane. I immediately wanted one. What a great way to have fun specially in a small area (like your back yard). Jason Uberig of http://uberfly.ca saw my post and sent me a copy of his Phat Hawk 3D EPP plane to...

This is my flat-design 3D plane based on the popular flat flying smaller 3D planes on the market. Wingspan is 30 inches and it is a blast to fly! Good for small spaces. A small project I have been working on in my free time. I am using a brushless 1900kv Blue Wonder with a 3 cell battery, has a...

I will trade if need bee, i live in boston shiping is 50/50 cant go over 100, (i use spectrum) but can to pnp, prefered epp

Ok all my Flite test fans I know how you all love free plans :) so here is my latest creation. First Look Video Flying Video Motor used Bluewonder 1300-1500KV Prop GWS 9050 Aileron Servo HXT-900 Elevator/ Rudder Servo HXT-500 ESC 10 amp brushless Battery 300-500mah 2 cell 7.4 volt...

Post any pictures and videos of the ft 3d scratch build plane here.