Recently my son kept stealing my Fat Shark goggles.
I'd been using the Quanum DIY FPV Goggle Set with Monitor (KIT) as my GS monitor but decided I better build them up.
Only one problem. With the RX from the ground station it was a very bulky over weight setup.
By chance I spotted a nice...
Hey everyone, first post...
So I've been meaning to ask some technical questions about the factors that are involved in the FPV system. I've just pieced together my first system over the weekend and took a maiden flight a bit earlier today, and so far it was a success, but I'm trying to...
So I have a 5.8GHz sky zone plug and play + quantum fpv goggles. I did have it working at first but I only got about 100ft to 150 ft of rang from it. From what I can tell that is really small. Now I cant get more than 50ft away and my signal keep cutting out randomly even if I'm not moving or...
Finally this bad boy arrived.
Eachine 700TVL 1/3 Cmos FPV 110 Degree Camera w/32CH Transmission
Placed the order with Banggood back in January and right now items are taking a month to come in.
Still well worth the wait specially since this unit only cost $30 Canadian.
The last 200mw micro...
Hey Guys So I really wanna be able to fly FPV at Flite Fest this year but if my experience down at E-Fest in Champaign this past January showed me anything is that 5.8 RHCP is so common that I had a hard time flying it during the event. So here's my debate. I've pretty much decided to go with...
Hey all,
To start, I'm a NOOB.
My problem is that I loose FPV signal at around 200 - 300 ft. I am using a Skyzone 200 FPV from Hobbyking (Quanum Complete FPV Bundle Set w/ Goggles, 5.8GHz 32ch Video TX & RX, CP Antennas and Camera (PNF))
I have the TX and Camera running off a 500mah 2s and the...
I've been slowly building up my ground station.
First it started off with a DVR unit. (Portable DVR for FPV)
Forum conversation.
Then I picked up a Quanum DIY FPV Goggle Set. I never indeeded to use the set as goggles but rather a monitor for my spotter or me.
The combination was...
I purchased a 400 mw 5.8ghz transmitter and receiver from China (I know my first mistake) and have been having a difficult time getting everything working. I have tested the camera by directly connecting it to a tv and it does work. I have tried every channel configuration possible and I never...