esc electronics help

So, I 'm putting together a FT Cuiser, and it's my first attempt with a multi-motor electric. I'm up to the point of installing the ESC's and making sure the motors turn in the proper directions. I tried using a Spektrum DX7 transmitter with a Spektrum AR630 receiver. I bound the first ESC and...

Hi, I have an Art-Tech F4u Corsair Power plant with 20A brushless Esc, 4 Servos, 6ch receiver, and a C4038-15- 11.1v Motor. When I plug my battery in my motor beeps every second continuously and there is no (RING) tone my servos respond accordingly to my inputs but there is no throttle control...

Hello, I am 15 and just getting into the hobby. I have built a few FT planes before, and this is a new and interesting story. I got my tiny trainer speed build kit over the weekend. The build of the plane went fine. Receiver binding and servos all worked well. At times, when powered on, after...

Hi, thats my first post and also my first scratch build so I'm pretty much a newbie. I built a FT Mini F-22 and it was working great. For different reasons I now wanted to use another ESC and I bought a cheap 30A Simonk ESC from ebay. The problem is that with this ESC I have alot less thrust. My...

hey guys, im a rookie when it comes to drones. So when messing around with bheli I flashed my lumineer Simon 12a esc for my qav 210 with firmware from an Afro 12a. I figured it would work because of the Simon between them but now my esc when I turn them on only beep and do not spin up the...

Sorry, not sure if this is the right place, so mods please move if needed. I scored a recovered X3 UCAV drone that was crashed in a tree and never claimed. It wasn't worth buying the gear to get it going, so I decided to strip it for bits. The motors run mint, but it noticed the ESC's...