flerken

I was playing around with some tiltrotor concepts and it turns out that the Mellenium Flerkin is a darn good candidate to conver to a tiltrotor. It's huge electronics bay makes the flight controller easy, and the vertical fins do a nice job of protecting the rear prop from ground strikes...

I want to build a Nano Flerken but I only have 2205 motors, could it work? I have some small 3in props that I could use. And if not how many sheets of foam dose the millennium Flerken need? Thanks in advance for the replies:)

Hey guys I’ve been doing some research into FPV flying and I’m wondering what the benefits are between the FT Flerken and other long range FPV platforms such as the ZOHD Dart XL (or any other of the category. The Dart XL is just an example). I’m wondering about stability, efficiency, and range...

A few weeks ago, I got the great deal on the FT Millennium Flerken Value Bundle, obviously hoping to put it all together someday. However, I also got it for the sake of the parts that already work together (I have receivers available). Given the motor, ESC, prop, and servo values (2500kV, 25A...

Hi all! My Franken Flerken should be going back up this week with it's new Eye (FPV) and Aura fc. lol I may be back to tell a sad story of crash.... But it'll make a good vid for my Youtube channel! LOL

FT Flerken Printed Parts 3D Modeled By: Dan Sponholz If you're building the FT Flerken from the purchased plans available from the FTCA, you can print these STL files to help you complete your build. Or save even more time and order the speed build kit here: FT Nano Flerken FT Flerken...

You can purchase the FLERKEN PLANS on the FTCA Portal, now! Get 'em while they're hot!

FT Flerken Printed Parts 3D Modeled By: Dan Sponholz If you're building the FT Flerken from the purchased plans available from the FTCA, you can print these STL files to help you complete your build. Don't have a printer? No Problem. You can order the plywood parts from the Flite Test Store...