lux

Just upgraded my Naze (due to its unwillingness to connect to BF) to a Lux V2. The board powers up fine when plugging it in to my pc, and is found by BF fine. The problem is when I plug in my battery it doesnt turn on. I've checked/redid the solder joints many times. The most I get is the board...

I'm almost at a loss for words... I attempt to solder a lead to the BAT pad on lux flight controller and almost as soon as my soldering iron touched the pad off came the plate, leaving plastic and no conductive pad. Is there any coming back from this?

So I recently purchased everything I thought I needed to build my first quadcopter, the versacopter kit, e-pack, battery, with a lux flight controller and D4R-II receiver. About halfway through the build, I am now stuck with figuring out how the lux flight controller and D4R-II has a place in...