Theuglycamel
Active member
Hello All,
I've been off-grid for awhile now, and I wanted to post up some of the projects I've been working on this winter. I got into mini quads last summer and I've been torn between these guys and my FW babies.
I'm finishing up my 110% cruiser with my "Black Magic" touch. I've been dragging this one out (been working on it since May) just because I'm scared to death of killing her. That's what you get when you put too many hours into a foamy lol. (flysky fs-ia10, Sunfounder 9g clutch servos, emax 2212 1400kv spinning 8x5 cf props).
Next I rebuilt my 7yr old daughters Mini Cruiser. Expanded the nose and wired it in for my TOP camera/VTX combo. (FS-ia6, Sunfounder 9g Clutch servos and no name 5g digitals, walkera 2204 2200kv.)
I built up a tiny trainer with the aileron wings to get my old man and youngest kiddo into the game. It's turned out to be a blast and I'm going to have to build another to form up with. (FS-ia6b, PTK 5g digital metal gear servos, emax 2204 2300kv)
And my current Pride and Joy, i broke down and bought a wing. Sonicmodel ar wing 900. I built one with an APM mega and THRASHED it. Had so much fun I bought another and built it up as so: (FS-ia6b, APM Mini 2.7.2 FC, hto4_osd with 900mhz telemetry, APM power module with 5v BEC, AKK F2 Ultimate VTX, 1600tvl cmos camera, Hawkeye Firefly action camera, UBLOX M8N GPS, FlyColor 30a esc with sunnysky 2216 1400kv spinning a 8x6x3). Again, I spent WAY too much time on this one trying to get these old APMs to speak fluently. I almost trashed the osd until I found out the APM power module wasn't robust enough to run the fc, receiver, and osd. Tied it into the esc with the servos and it's crystal clear again. I smoked one camera and a vtx while sorting this all out (the vtx was an AKK DVR ) but all in all I'm happy with the results. I'm very surprised these 8 bit flight controllers can perform as well as they do. With a fixed wing (especially a flying wing) there's very little resources allocated to motors and servos so it does really well even when autotuning and FBWA/B.
We've got some sunshine today so I'll lay everything out for a photoshoot this evening. Hope to see everyone at FF2020!
I've been off-grid for awhile now, and I wanted to post up some of the projects I've been working on this winter. I got into mini quads last summer and I've been torn between these guys and my FW babies.
I'm finishing up my 110% cruiser with my "Black Magic" touch. I've been dragging this one out (been working on it since May) just because I'm scared to death of killing her. That's what you get when you put too many hours into a foamy lol. (flysky fs-ia10, Sunfounder 9g clutch servos, emax 2212 1400kv spinning 8x5 cf props).
Next I rebuilt my 7yr old daughters Mini Cruiser. Expanded the nose and wired it in for my TOP camera/VTX combo. (FS-ia6, Sunfounder 9g Clutch servos and no name 5g digitals, walkera 2204 2200kv.)
I built up a tiny trainer with the aileron wings to get my old man and youngest kiddo into the game. It's turned out to be a blast and I'm going to have to build another to form up with. (FS-ia6b, PTK 5g digital metal gear servos, emax 2204 2300kv)
And my current Pride and Joy, i broke down and bought a wing. Sonicmodel ar wing 900. I built one with an APM mega and THRASHED it. Had so much fun I bought another and built it up as so: (FS-ia6b, APM Mini 2.7.2 FC, hto4_osd with 900mhz telemetry, APM power module with 5v BEC, AKK F2 Ultimate VTX, 1600tvl cmos camera, Hawkeye Firefly action camera, UBLOX M8N GPS, FlyColor 30a esc with sunnysky 2216 1400kv spinning a 8x6x3). Again, I spent WAY too much time on this one trying to get these old APMs to speak fluently. I almost trashed the osd until I found out the APM power module wasn't robust enough to run the fc, receiver, and osd. Tied it into the esc with the servos and it's crystal clear again. I smoked one camera and a vtx while sorting this all out (the vtx was an AKK DVR ) but all in all I'm happy with the results. I'm very surprised these 8 bit flight controllers can perform as well as they do. With a fixed wing (especially a flying wing) there's very little resources allocated to motors and servos so it does really well even when autotuning and FBWA/B.
We've got some sunshine today so I'll lay everything out for a photoshoot this evening. Hope to see everyone at FF2020!