Ailerons with FS-I4 transmitter can you do it

[Willflitest2021]

Hi I really need some help with a question,
I am just wondering because i have one can you set up Ailerons with the FS-I4 transmitter and FS-IA6B reciver I am dying to know

 

[JasonK]

that looks like it is a 4 channel, very basic TX... if you use 2 servos, you would need to use a y-cable between the receiver and the ailerons. or you could do some complicated linkages.

 

[Willflitest2021]

that looks like it is a 4 channel, very basic TX... if you use 2 servos, you would need to use a y-cable between the receiver and the ailerons. or you could do some complicated linkages.

Yea that is what I have done but I don’t know what channel to put it in any cluse but thanks fir the help appreciate it thanks.

 

[JasonK]

Yea that is what I have done but I don’t know what channel to put it in any cluse but thanks fir the help appreciate it thanks.

plug in power to your receiver, connect a servo, wiggle the aileron channel, if it moves, that is the correct channel. (try different channel if it doesn't)

 

[Merv]

With Flysky, channel 1 is aileron, 2 is elevator, 3 is throttle, 4 is rudder.

 

[Ratcheeroo]

Yea that is what I have done but I don’t know what channel to put it in any cluse but thanks fir the help appreciate it thanks.

Channel one is aileron

 

[Willflitest2021]

With Flysky, channel 1 is aileron, 2 is elevator, 3 is throttle, 4 is rudder.

Thanks alot really helped me out

 

[Willflitest2021]

plug in power to your receiver, connect a servo, wiggle the aileron channel, if it moves, that is the correct channel. (try different channel if it doesn't)

Thanks alot guys

 

[Willflitest2021]

Channel one is aileron

Thanks