Any questions for the FTAH Podcast

airhawk

Crashing Ace
Hi FTAH a few questions first Are you going to get the new pulse 15e for review second question is the after hours crew coming to FF in the west

Thanks
-Airhawk
 

Snarls

Gravity Tester
Mentor
I want to ask what you guys think of the new DJI Zenmuse x5 and FLIR Vue Pro cameras. It would be nice too if you (Andre) could update us on your miniquad and AP quad. Also what do the members of the FTAfterhours crew do to feed their rc addiction when they can not go to the field and fly.
 
I have a crash story, if it could be read, that would be great! Last week my flying buddy came down about two hours to fly with me. I was flying my mini guinea around and showing the flat spin on it to him, then let him fly. he had a mobius, so I though it would be a good idea to put it on backwards, and rubber band it on with the wing rubber bands. this was the "one more time" moment, after I had done a successful flat spin, he prompted me to do one more, so i did. Once I tried to stop it, the right motor quit on me. not the time, when you have 80 dollars of your friends stuff on your mini guinea you put double the time you normally would in painting, all you can think is "no. no. don't. no." so it started the slow spiral of death to the right, me being unable to recover it. a loud pop from the nose as it ripped through the packing tape, and the mobius bouncing off the ground 4 feet away.the plane looked like it pile drived itself in, it was stuck at a 15 degree angle to the ground, and the top of the nose was pushed over the top front of the fuse. the minwax-treated craft paper was ripped at almost all the seams, so it looked pretty messy. that was the least of the damage. A wire had separated from the bullet connector, and one of the motor screws slipped thru the mount. the wing was bent down near the roots, and had polyhedral at the tips. it was in bad shape. At least it wasn't my mobius!
 
Last edited:

Kurt0326

Your ADD Care Bear
Mentor
I have a crash story, if it could be read, that would be great! Last week my flying buddy came down about two hours to fly with me. I was flying my mini guinea around and showing the flat spin on it to him, then let him fly. he had a mobius, so I though it would be a good idea to put it on backwards, and rubber band it on with the wing rubber bands. this was the "one more time" moment, after I had done a successful flat spin, he prompted me to do one more, so i did. Once I tried to stop it, the right motor quit on me. not the time, when you have 80 dollars of your friends stuff on your mini guinea you put double the time you normally would in painting, all you can think is "no. no. don't. no." so it started the slow spiral of death to the right, me being unable to recover it. a loud pop from the nose as it ripped through the packing tape, and the mobius bouncing off the ground 4 feet away.the plane looked like it pile drived itself in, it was stuck at a 15 degree angle to the ground, and the top of the nose was pushed over the top front of the fuse. the minwax-treated craft paper was ripped at almost all the seams, so it looked pretty messy. that was the least of the damage. A wire had separated from the bullet connector, and one of the motor screws slipped thru the mount. the wing was bent down near the roots, and had polyhedral at the tips. it was in bad shape. At least it wasn't my mobius!

Oh you can get it flying again... ask Andre, his ft racer survived.
 

Spastickitten

Senior Member
What is your opinion on 180s, the umx spitire/ p40, and how do you guys think hobbyking has progressed? It used to be a much less reliable brand with bad models, but it seems to have changed a bit. Oh and of coarse hire me.
 

AdamV

New member
I'd like to hear about which goggles you guys use for FPV, and perhaps why? What would you get today with current product lines, were you doing it again?

I have recently ordered the attitude v3's as my first pair of goggles & i'd be curious to see what you guys use.