rryyyaannn
Member
I was in the process of binding my Calypso and didn't realize that my throttle was in the up position. This put the glider into throttle calibration mode. I tried several times to re calibrate the throttle as per the manual but have been unsuccessful. While flying when I cut the throttle the prop still turns slowly despite the throttle being all the way down on my transmitter.
\\
Im using a DX6i with Anylink2 and an Tactic SLT RX Any ideas?
Thanks!
\\
Im using a DX6i with Anylink2 and an Tactic SLT RX Any ideas?
Thanks!