alnaader88
Junior Member
hello ;
I'm new here My name Nabil and I'm Happy to join u .
i made my first T-copter but i got problems just to get the motors run together i have seen a lot of youtube videos but still i can't understand why motors not run properly .
i'm using :
- Turnigy 2730 Brushless Motor 1700kv
- TGS Sport 7x6E Precision propeller
- HobbyKing 12A BlueSeries Brushless Speed Controller
- HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
- using R/C Expert built 27MHZ RX&TX till i receive my new Hobby King 2.4Ghz 6Ch Tx & Rx V2 .
problems.
1- kk board does it need to be programmed for T-copter??? .
2- motors run together till 50% after 50% one of them run more than others .
3-the Rudder , Aileron & Elevator does not operate if throttle is 0% .
. I have seen many videos the Rudder , Aileron & Elevator operate in tricopter without operate the throttle .. can some one help me with that ???
4- the servo move just one direction when I rise throttle .
4- I checked the motor individual they work ok but through kk board no .
i need your help i don't know if this means the board not work properly or the TX&RX not suitable for the kk Board or the board need to be programmed
I'm new here My name Nabil and I'm Happy to join u .
i made my first T-copter but i got problems just to get the motors run together i have seen a lot of youtube videos but still i can't understand why motors not run properly .
i'm using :
- Turnigy 2730 Brushless Motor 1700kv
- TGS Sport 7x6E Precision propeller
- HobbyKing 12A BlueSeries Brushless Speed Controller
- HobbyKing Multi-Rotor Control Board V2.1 (Atmega168PA)
- using R/C Expert built 27MHZ RX&TX till i receive my new Hobby King 2.4Ghz 6Ch Tx & Rx V2 .
problems.
1- kk board does it need to be programmed for T-copter??? .
2- motors run together till 50% after 50% one of them run more than others .
3-the Rudder , Aileron & Elevator does not operate if throttle is 0% .
. I have seen many videos the Rudder , Aileron & Elevator operate in tricopter without operate the throttle .. can some one help me with that ???
4- the servo move just one direction when I rise throttle .
4- I checked the motor individual they work ok but through kk board no .
i need your help i don't know if this means the board not work properly or the TX&RX not suitable for the kk Board or the board need to be programmed