Rian_OShea
New member
I recently have been getting my Apprentice ready to fly again after a couple of crashes. All has been going well but I have stumbled across an issue with the propeller.
I took off the spinner and the nut and washer that came with it, and all that remains is the propeller that is stuck to the motor collet. The propeller used to come off with ease, like demonstrated in this video at 1:15.
The propeller is completely stuck and doesn't come off with as much pressure I can apply.
Some images:
Thanks in advance,
Rian
I took off the spinner and the nut and washer that came with it, and all that remains is the propeller that is stuck to the motor collet. The propeller used to come off with ease, like demonstrated in this video at 1:15.
The propeller is completely stuck and doesn't come off with as much pressure I can apply.
Some images:
Thanks in advance,
Rian