Electric power pack for super sportster/any ideas welcome

[Off-topic jes]

Hello everybody, I am looking to convert the super sportster 9120 size to electric power if possible. any ideas are welcome of where I can buy these electronics and what size they should be thank you!

 

[Off-topic jes]

Hello everybody, I am looking to convert the super sportster 9120 size to electric power if possible. any ideas are welcome of where I can buy these electronics and what size they should be thank you!

Speaking of the super sportster I was working on it today ironically and here’s the progress I might try to mount the engine this afternoon but depends on what you guys say

 

[Off-topic jes]

Speaking of the super sportster I was working on it today ironically and here’s the progress I might try to mount the engine this afternoon but depends on what you guys say

 

[Off-topic jes]

The engine is mounted for the final time at this rate I should have it finished by the end of the month

 

[Off-topic jes]

The engine is mounted for the final time at this rate I should have it finished by the end of the month View attachment 230172

Jhgujbyjbgu

 

[FlyingTyger]

I'd be looking at a 50mm outrunner on 6S. I have a similar sized Spinks Akromaster I am converting; here's what I bought.
Motor - https://hobbyking.com/en_us/propdrive-v2-5060-380kv-brushless-outrunner-motor.html
ESC - https://hobbyking.com/en_us/hobbyking-red-brick-100a-esc-5vbec.html
Prop - https://www.chiefaircraft.com/radio-control/propellers-spinners/xoar/beechwood/xoar-16x8-bch.html
Battery will be a 6S, 5000mah.

 

[Off-topic jes]

I'd be looking at a 50mm outrunner on 6S. I have a similar sized Spinks Akromaster I am converting; here's what I bought.
Motor - https://hobbyking.com/en_us/propdrive-v2-5060-380kv-brushless-outrunner-motor.html
ESC - https://hobbyking.com/en_us/hobbyking-red-brick-100a-esc-5vbec.html
Prop - https://www.chiefaircraft.com/radio-control/propellers-spinners/xoar/beechwood/xoar-16x8-bch.html
Battery will be a 6S, 5000mah.

thanks, and this is a next time build, this sporster will be nitro

 

[Off-topic jes]

Well I finish the covering on the super sportster almost anyway. Now all I need is a canopy and I can go flying!