favourite 15A esc from lazer toys for swapable 3

[kevintmckay]

Hey Guys,

I got a "favourite" 15A esc with a power pack from lazer toys when I was starting out with the swapable 3. Just tried to re purpose it for a different project but it just goes through the setup beeps... I spent hours scouring the web and trying to get it out of setup mode, anybody know about these esc's or have a manual. I have called lazer toys and sent them emails but they never respond.

Thanks

 

[Scoobyvroom]

Un-plug everything.
Turn on TX and put throttle to full power.
Plug ESC into a known working RX that is bound to the TX.
Plug in battery
Pull the throttle down to no power.

This should calibrate the ESC to your throttle.

This is my best guess with the information provided. If you can find the name of the ESC, or post a picture it might help.

 

[Ron B]

I had a problem like this and found that I had the servo wires in upside down as well as the esc lead to the rx
A friend found it for me and I sure felt like a fool.
Check the esc lead to rx and make sure it is in properly.