Sebastian6600
Junior Member
Hi to everybody,
Actually from about an year am using an RC Hely and now I want to build a quadcopter from zero.
I have enough dexterity with these things and the assembly would not be a problem at all, the only thing that gives me a little 'anxiety is the fact if really work!
First I look around on web on project based on Arduino Uno( I have it already ) but I decided to use a MultiWII board.
Considering I'm new to these word, after hours of searching and studying different typologies I write down this material list:
MAIN CARD: MultiWII Atmega32U4
FRAME: Hobbyking Q450mm V3 ( Initially I wanted to built it from myself but they are not so expensive so.. )
MOTORS: 4x HexTronic DT700 Brushless
ESC: 4x Hobbyking 20A 3A UBEC with HobbyKing programmer
PROPELLER: 1x 12x3.8Turnigy CW and 2x CCW
LIPO: 1x ZIPPY 5000mAh 3S1P 20C
CHARGER: Hobbyking 174DC 4S 30w
RADIO: Turnigy 9X V2 with 8ch receiver
I read a lot of pro for the MultiWii, also for the GPS connector( maybe in future).
For the Radio I choose the Turnigy 9X because it don't cost a lot and I can use it in future project.
What you think about it? Wrong materials or I have forget something(omitting various wires and connectors)?
And for last, I choose this medium size because I'll attach in future a video-camera(without put on to much heavy)
Actually from about an year am using an RC Hely and now I want to build a quadcopter from zero.
I have enough dexterity with these things and the assembly would not be a problem at all, the only thing that gives me a little 'anxiety is the fact if really work!
First I look around on web on project based on Arduino Uno( I have it already ) but I decided to use a MultiWII board.
Considering I'm new to these word, after hours of searching and studying different typologies I write down this material list:
MAIN CARD: MultiWII Atmega32U4
FRAME: Hobbyking Q450mm V3 ( Initially I wanted to built it from myself but they are not so expensive so.. )
MOTORS: 4x HexTronic DT700 Brushless
ESC: 4x Hobbyking 20A 3A UBEC with HobbyKing programmer
PROPELLER: 1x 12x3.8Turnigy CW and 2x CCW
LIPO: 1x ZIPPY 5000mAh 3S1P 20C
CHARGER: Hobbyking 174DC 4S 30w
RADIO: Turnigy 9X V2 with 8ch receiver
I read a lot of pro for the MultiWii, also for the GPS connector( maybe in future).
For the Radio I choose the Turnigy 9X because it don't cost a lot and I can use it in future project.
What you think about it? Wrong materials or I have forget something(omitting various wires and connectors)?
And for last, I choose this medium size because I'll attach in future a video-camera(without put on to much heavy)
Last edited: