Part FT Flerken Printed Parts 1.0

[flitetest]

flitetest submitted a new resource:

FT Flerken Printed Parts - STL Files for Printable Parts to Build the FT Flerken

FT Flerken Printed Parts
3D Modeled By: Dan Sponholz​

View attachment 219204

View attachment 219205
​

FT Flerken 3D Parts.zip file contains:

Hatch Part A	Flerken_A.stl
Hatch Part B	Flerken_B.stl
Hatch Part C	Flerken_C.stl
Battery Tray	Flerken_BT.stl
Firewall...

Read more about this resource...

 

[Aslansmonkey]

Excellent! Downloaded the plans already so these were needed.

I already built the kit, but I want to make another with an EDF because this plane, I think, is begging for an EDF. I'm kind of waiting to see how other's efforts to that end turn out first though.

 

[Ligbaer]

This pretty flerkin cool!
(see what I did I'm so funny)

 

[Mr.Grinch]

Is there any reason to use the flat firewall over your other design?

 

[Madspadder]

Excellent! Downloaded the plans already so these were needed.

I already built the kit, but I want to make another with an EDF because this plane, I think, is begging for an EDF. I'm kind of waiting to see how other's efforts to that end turn out first though.

I have an edf built and hoping to maiden it on Sunday. I will post a video if it works. The first one that zI built flies great with the cg back 1/2" from the marks.

 

[rodgermoore]

for the nano flerken you print these parts at 60% L x W and 200% H.
Works great. Thanks for sharing.

 

[SP0NZ]

for the nano flerken you print these parts at 60% L x W and 200% H.
Works great. Thanks for sharing.

I will also be modeling and posting a set of Nano Flerken Printed parts. They should be available around the same time that the plans are available on the FTCA web site.

 

[Unfair Animal]

I will also be modeling and posting a set of Nano Flerken Printed parts. They should be available around the same time that the plans are available on the FTCA web site.

Just curious if these stl files for the nano flerken were released, i cant seem to find them.

 

[SP0NZ]

Just curious if these stl files for the nano flerken were released, i cant seem to find them.

Not yet, I'm still working on them.