Gremlin V2 won’t fly

[Harv3034]

Just finished building and programming the guardian gremlin V2 as shown in the guide videos but even at full throttle, it won’t (can’t?) lift off the ground. Did I miss something?

 

[mastermalpass]

Sounds like you have the props on the wrong motors. Spool the motors up a bit and hold your hand above the quad - can you feel it blowing any air upwards? If so, two or more of your props need to swap places.

 

[Ryan O.]

Just finished building and programming the guardian gremlin V2 as shown in the guide videos but even at full throttle, it won’t (can’t?) lift off the ground. Did I miss something?

To add on to what mastermalpass said, check that the props match this layout.