• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Has flitetest ever posted a video on designing foamboard builds in 3d?

Flying Monkey fab

Well-known member
#2
I have not seen anything specific on this but as one with similar aspersions I can say that you can learn a tremendous amount by building and studying existing designs. Learning by deconstruction.
Also if you are using Fusion 360 don't forget about slicer for F360 as a way to work through folds.
 

Jonny360

Junior Member
#3
I have not seen anything specific on this but as one with similar aspersions I can say that you can learn a tremendous amount by building and studying existing designs. Learning by deconstruction.
Also if you are using Fusion 360 don't forget about slicer for F360 as a way to work through folds.
I'm specifically looking to learn how to design in the computer and then have the foam cnc cut. I feel like just the basics of design I have got and could do this by hand but really want to learn how to do it in the virtual world.

Any links for the slider you are speaking of?
 
#9
I’m not familiar with Creo... does the blue in the background generate based off of the solid body?
Hello. Yes. You can see in the model tree on the left that I did it with a Flatten Quilt command. I've been too busy on the farm to put more time into it. This winter... 👍