DavidtheDJ
Casual Crasher
Hello there,
I am here to ask for some help. I have been putting my together my own quad for sometime but as I have been adding more and more to it, the heavier is has gotten. I'm trying to get in the air after I put new motors and ESCs that I thought would work. I now have TURNIGY Plush 40amp ESCs powering Turnigy Multistar 3525-750Kv 14Pole motors but with my setup I am using 3/4 of throttle to get it to rise. I am also worried that the motors don't have the power on demand that it needs to make the adjustments it needs to level itself. Would 50amp ECSs(HK Blueseries) be fine with the motors I have bought?
Here is what is on the muiti-rotor when fully loaded.(Bought all parts from hobbyking)
TURNIGY Plush 40amp
Turnigy Multistar 3525-750Kv 14Pole Multi-Rotor Outrunner
15x4E Carbon Fiber Propellers
ZIPPY Flightmax 5000mAh 3S1P 20C
ImmersionRC EzOSD FPV on Screen Display
FatShark Teleporter V3 RTF FPV
Headset System w/Camera and 5.8G TX
Quanum Q-2D Brushless
Gopro hero 4 black
Hobbyking X525 V3 Glass Fiber Quadcopter Frame 600mm
Hobbyking KK2.1HC Multi-Rotor Hard Case Flight Control Board
some light weight parts
Also was going to upgrade my control board to a DJI Naza-M Lite with GPS. Would it still be okay?
Thank you for responding! Yes I am new.
I am here to ask for some help. I have been putting my together my own quad for sometime but as I have been adding more and more to it, the heavier is has gotten. I'm trying to get in the air after I put new motors and ESCs that I thought would work. I now have TURNIGY Plush 40amp ESCs powering Turnigy Multistar 3525-750Kv 14Pole motors but with my setup I am using 3/4 of throttle to get it to rise. I am also worried that the motors don't have the power on demand that it needs to make the adjustments it needs to level itself. Would 50amp ECSs(HK Blueseries) be fine with the motors I have bought?
Here is what is on the muiti-rotor when fully loaded.(Bought all parts from hobbyking)
TURNIGY Plush 40amp
Turnigy Multistar 3525-750Kv 14Pole Multi-Rotor Outrunner
15x4E Carbon Fiber Propellers
ZIPPY Flightmax 5000mAh 3S1P 20C
ImmersionRC EzOSD FPV on Screen Display
FatShark Teleporter V3 RTF FPV
Headset System w/Camera and 5.8G TX
Quanum Q-2D Brushless
Gopro hero 4 black
Hobbyking X525 V3 Glass Fiber Quadcopter Frame 600mm
Hobbyking KK2.1HC Multi-Rotor Hard Case Flight Control Board
some light weight parts
Also was going to upgrade my control board to a DJI Naza-M Lite with GPS. Would it still be okay?
Thank you for responding! Yes I am new.
Last edited: