Bricks
Master member
I knew the Hall gimbals on the Radiomaster would deviate some but not this much. It seemed lately when ever I flew I was having to constantly change trims I checked the calibration of the sticks and they were way off, Elevator was -16% Rudder +28% Ailerons were -43%. With temperature changes keep a good eye on them and recalibrate often as they change with temperature, Taking it from a warm house to very cold outside may have a heck of a change in the centering of your sticks.
If the calibration is off this is the first thing your receiver sees when it initiates so some of your control surfaces could be way off.
To check yours push down on scroll wheel go to monitors and push down again, it will give you your outputs. If you need to recalibrate be gentle do not bang the sticks around be gentle. Once done recheck the monitor to see if they are back to zero.
If the calibration is off this is the first thing your receiver sees when it initiates so some of your control surfaces could be way off.
To check yours push down on scroll wheel go to monitors and push down again, it will give you your outputs. If you need to recalibrate be gentle do not bang the sticks around be gentle. Once done recheck the monitor to see if they are back to zero.
Last edited:
