Motor and Esc to Buy

[Bbjen]

If I was to but one Motor and one Esc form hobbyking to be able to make any FT plane. What would it be...

I am going to teach childrens on or to make airplanes at our local youth center and I was wondering what to buy so they can make any ft plane and have all the same electornics.

Anyone have a clue?

 

[ExperimentalRC]

I think this should be around the same spec for the motor: http://www.hobbyking.com/hobbyking/...e_Series_28_30_1200kv_400w_US_Warehouse_.html

ESC:
http://www.hobbyking.com/hobbyking/...sh_25amp_Speed_Controller_USA_Warehouse_.html

You will also need some 3.5mm bullets for the ESC and an xt60 or whatever connector your battery has.

 

[PhenomPilot]

There isn't one that will be great for everything but if you are teaching them to fly as well, a lighter/slower setup would be better. I was thinking something smaller like
http://www.hobbyking.com/hobbyking/store/__25076__NTM_Prop_Drive_Series_28_26_1100kv_252w.html

This is a little bit more motor than I would like for a trainer setup Ft Flyer but would work well for the bloody wonder, versa or dusty. Put in a spitfire, mustang or Fd 3d it might be a little underpowered.

 

[Bbjen]

Thank you guys,
Here is what was on my list.

http://www.hobbyking.com/hobbyking/store/__25084__NTM_Prop_Drive_Series_28_26A_1200kv_286w_short_shaft_version_.html
http://www.hobbyking.com/hobbyking/store/__16719__NTM_Prop_Drive_28_Series_Accessory_Pack.html
http://www.hobbyking.com/hobbyking/store/__15205__Hobby_King_30A_ESC_3A_UBEC.html
with a 10 inch prop... But I think I should go with a 8 inch prop... for the motor...

Driven by 3s 2200maH http://www.hobbyking.com/hobbyking/store/__9394__Turnigy_2200mAh_3S_30C_Lipo_Pack.html

 

[Jaxx]

Thank you guys,
Here is what was on my list.

http://www.hobbyking.com/hobbyking/store/__25084__NTM_Prop_Drive_Series_28_26A_1200kv_286w_short_shaft_version_.html
http://www.hobbyking.com/hobbyking/store/__16719__NTM_Prop_Drive_28_Series_Accessory_Pack.html
http://www.hobbyking.com/hobbyking/store/__15205__Hobby_King_30A_ESC_3A_UBEC.html
with a 10 inch prop... But I think I should go with a 8 inch prop... for the motor...

Driven by 3s 2200maH http://www.hobbyking.com/hobbyking/store/__9394__Turnigy_2200mAh_3S_30C_Lipo_Pack.html

The items you have listed make up a great combination. You should be very happy with it.