Motor/ESC combo?

TheFlyingBrit

Legendary member
I was wondering if the Emax 2213 935kv motor (https://store.flitetest.com/emax-mt2213935-935kv-brushless-motor-emx-mt-1534/p733346) would work with the FT 35a ESC (https://store.flitetest.com/flite-test-ft-35a-esc-w-xt60-connector-flt-3038/p846364) and are the bullet connectors the same size?
when I got my 2213 motor it came with the female bullet connectors in a seperate bag, so you can swap them over easily if needed. Assuming your handy wth a soldering iron (y)
 

TheFlyingBrit

Legendary member
Check out the picture of the motor on the link you sent the correct size connectors are with the mounting bolts to the left. You will probably find they are the same size anyway on the ESC as they only increase the bullet sizes above 60 amp rated ESC's as a rule.