• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.
Pumpkin drop event

Solved Planning a Valiant Build!

#1
Does anyone have any tips on videos that walk through how to set up all of the electronics that go into gasers? I've only built electrics. I own gasers but have never built them. For example, the Evolution 3 Wire Ignition Switch/Rx and 3 Wire Switch Harness. I don't understand how to wire them all together. Or how it connects to the receiver battery.
 
#2
I had a gasser 3-channel. A servo opened and closed air going into the glow motor, the flight servos ran off a battery pack and the receiver controlled these functions.