Pricing a cheap-ish TBS DIsco build + Advice on a lot of the selected parts. (U.K)

[helinor]

Got a link for the breakout cable?, also would you recommend using a UBEC for the FC or just take the power direct from the ESC?

Harness
http://hobbyking.com/hobbyking/stor...ullet_Multistar_ESC_Power_Breakout_Cable.html

I have OPTO´s so I use this UBEC
http://hobbyking.com/hobbyking/stor...se_Reduction_EU_Warehouse_.html?strSearch=bec

 

[Ddm5]

Harness
http://hobbyking.com/hobbyking/stor...ullet_Multistar_ESC_Power_Breakout_Cable.html

I have OPTO´s so I use this UBEC
http://hobbyking.com/hobbyking/stor...se_Reduction_EU_Warehouse_.html?strSearch=bec

That's the UBEC I've seen a few times, also thanks for the link on the Harness and to be honest, I've been pricing around a Q450 frame + Genuine black arms since I prefer the PDB. Q450 with the arms is about £3 cheaper than buying a genuine F450 frame + I'll have the spare arms from the Q450 just in case. Also probably going to drop the 30A Afro's for 30A Emax ESC's since I get can the majority of the parts from one site and avoid any bullshit with Hobbyking if something did go wrong / was faulty.