KNicholas2
New member
I am building the Versacopter with the guidance from Josh's (and others) video. No matter what I try, motor #3 starts before any others. I cannot seem to get them calibrated.
Here are some observations and issues:
- I am using a Futaba radio
- I am using the latest version of CleanFlight for NAZE 32 ver. 6.
- the version of ESC that FliteTest sent me do not appear to have OneShot
- all of the control responses are good when I look at the receiver module.
- Whenever I save and reboot the status info in the upper left window does not show reboot unless I disconnect and then reconnect.
- with the battery DISCONNECTED the motors will spool up in the motor configuration when I move the sliders to the maximum values of 1905.
- when I move the master ESC slider to maximum the motors spool up and there is no "beeping"
- if I attach the battery, all of the motors engage at the max RPM.
Any advice is appreciated.
Kim Nicholas
Here are some observations and issues:
- I am using a Futaba radio
- I am using the latest version of CleanFlight for NAZE 32 ver. 6.
- the version of ESC that FliteTest sent me do not appear to have OneShot
- all of the control responses are good when I look at the receiver module.
- Whenever I save and reboot the status info in the upper left window does not show reboot unless I disconnect and then reconnect.
- with the battery DISCONNECTED the motors will spool up in the motor configuration when I move the sliders to the maximum values of 1905.
- when I move the master ESC slider to maximum the motors spool up and there is no "beeping"
- if I attach the battery, all of the motors engage at the max RPM.
Any advice is appreciated.
Kim Nicholas