• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

RC Afterhours Podcast 91 - Emergency Landings!

Andre

Fly yes... land no.
Admin
#1
Wet day, figured I'd do a recap episode.
Lots to discuss.

https://rcafterhours.podbean.com/e/rc-afterhours-podcast-91-emergency-landings/


03 Oct 2021

Coming off a fun weekend of flying, do I have some stories to tell?

262 Gear Failure, bec, noise, radio or other?
Limp Toss, fixing the A-10
Fokker https://www.amazon.ca/gp/product/B08P21LJX5/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Crawler stuff
TBS Updates, SH18T
Fall flying
Fall Builds (HRC)
VR/Sim?

Podcast Gems:

Discount from The Hangar RC
Head over to https://www.thehangarrc.com and use discount code rcafterhours for 10% off.

Stickers - https://shop.spreadshirt.com/rcafterhours/sticker+sticker?q=P51

Buddy RC has reactivated the discount code for the podcast.
https://www.buddyrc.com/discount/rcafterhours
rcafterhours 10% off code

Use promo code VIDEO20 for 20% off any skis from the Du-Bro https://www.dubro.com

YouTube Live Stream

Podcast Patreon
https://www.patreon.com/rcafterhours

RC Afterhours Swag
https://shop.spreadshirt.com/rcafterhours/

RC Afterhours Podcast Social Media
http://www.rcafterhours.com
https://twitter.com/rcafterhours
https://www.facebook.com/RCAfterhours/
https://www.instagram.com/rcafterhours/
https://www.youtube.com/channel/UCbYpED0mauZw95FsroLpMQg
 

PsyBorg

Wake up! Time to fly!
#2
Quick way to find out if your on the right track is take it up high, chop throttle then cycle gear. If it goes down then you know your on the right track about the esc / motors. Another thing to check is if the retract wires are running parallel to any esc wires. That would certainly induct interference into the retract wires. even with my minimal build and flight experience with fixed wing I have always ran esc and power wires on one side of the fuse and the signal wires on the other. It the have to cross at any point I route then so any crossing is done at 90 degrees