• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Help! Servo arms?

BATTLEAXE

Well-known member
#2
There are different sizes but what I found if=s the emax take the smaller of the two sizes that I have for 9g servos, actually their 9g and 5g fit the same arm. I know that companies like TowerPro and Mizua (i think that is how it is spelled) use the larger cogs on the arms, so that's the two I am aware of
 

leaded50

Well-known member
#3
servoarms is something that always get too much of, since normally its 2-3 different delivered together with each servo. (even if can be bought too) it can be differences, specially by the screw that holds it.. but any 9g (8.5 eg) servo do have standard arms... but if are metalgear, its another screw that holds it..