Servo Wire Extension Lock 1.0

[johnbecker31]

johnbecker31 submitted a new resource:

Servo Wire Extension Lock - Wire Lock

A simple, yet perfect way to keep your servo wire extensions locked together. Easy to 3D print.

Read more about this resource...

 

[ScottInIowa]

johnbecker31 submitted a new resource:

Servo Wire Extension Lock - Wire Lock



Read more about this resource...

Awesome!! Thanks!

 

[tomlogan1]

johnbecker31 submitted a new resource:

Servo Wire Extension Lock - Wire Lock



Read more about this resource...

Thanks, again, John for all your contributions. Gonna use this on one I am working on now and will present this as a resource at our next club meeting. I presume we could resize for standard sized servos or scale down for smaller ones. Great add!

 

[johnbecker31]

Thanks, again, John for all your contributions. Gonna use this on one I am working on now and will present this as a resource at our next club meeting. I presume we could resize for standard sized servos or scale down for smaller ones. Great add!

if you can get me the measurements, I would be happy to customize it.

 

[Merv]

Great design, easy to print.
In the past I always used tape, this is a much better solution.

 

[Bricks]

Or you can buy them here https://duckduckgo.com/?t=ffab&q=rc+servo+wire+clips&atb=v412-1&ia=web or even much cheaper on Aliexpress.

 

[Merv]

I just printed 20 of them, 3.5 hrs & 23 cents worth of filliment, just over a penny a peice.

 

[Bricks]

Yeup and if you don`t have a printer, what was the original investment to produce the one cent item.

 

[L Edge]

I just printed 20 of them, 3.5 hrs & 23 cents worth of filliment, just over a penny a peice.

What is the weight of 4 of them?
I use one complete wrap of painter's tape and they have never let me down including crashes. Also, I cut/ grind excess of everything (bolts,wire,etc) to keep the weight down. Sure makes a light weight plane.

 

[AIRFORGE]

THANK YOU @johnbecker31 for providing this excellent safety option to the always kind and thoughtful FT Community!

 

[Merv]

What is the weight of 4 of them?...

4 of them are 3.3g, that's about 0.75g each.

 

[Bricks]

What is the weight of 4 of them?
I use one complete wrap of painter's tape and they have never let me down including crashes. Also, I cut/ grind excess of everything (bolts,wire,etc) to keep the weight down. Sure makes a light weight plane.

They work the best where wing comes off a plane and it has aileron and flap servos less fusing around.

 

[johnbecker31]

Yeup and if you don`t have a printer, what was the original investment to produce the one cent item.

Odd question. if one does not have a printer, then they would not be looking at 3D printed parts. Those who print, do. and most people know someone with a printer. Do what works best for you! and most importantly, KEEP FLYING!

 

[Bricks]

Odd question. if one does not have a printer, then they would not be looking at 3D printed parts. Those who print, do. and most people know someone with a printer. Do what works best for you! and most importantly, KEEP FLYING!

Can`t see the smiley`s DUH so now I am prohibited to looking at 3D printed parts, because I don`t have a printer but give people like me alternatives ???????????????

 

[AIRFORGE]

Slow down.
Take a breath.
Think about where we are.
Continue.

 

[johnbecker31]

Can`t see the smiley`s DUH so now I am prohibited to looking at 3D printed parts, because I don`t have a printer but give people like me alternatives ???????????????

I certainly was not trying to single you out in any way. If what I wrote was offensive, I apologize.

 

[skymaster]

I just printed 20 of them, 3.5 hrs & 23 cents worth of filliment, just over a penny a peice.

I printed a couple of them and on one side i keep getting the gap on one side closed with some stringing. nothing a blade can't solve.

 

[skymaster]

What is the weight of 4 of them?
I use one complete wrap of painter's tape and they have never let me down including crashes. Also, I cut/ grind excess of everything (bolts,wire,etc) to keep the weight down. Sure makes a light weight plane.

I don't know if the scale will register with 4 of them, super light.