Here is another balsa to foam conversion that worked well.
Sorry no flight video.
This one flew on a Hextronic 10g 2000Kv motor with a 5x5 and a 7x5 on a 350mah and a 500mah battery, it was pretty under powered and needed WOT to do any aerobatics.
The I flew it with a Hextronic 24g 1300Kv motor with a 7x5 and a 500mah 3s, it was pretty sporty for being on the heavy side.
I will try it with an Emax 2204 2300Kv motor with a 5x3, 5x5, and 6x3 soon and let you know how that works out.
In the mean time here are the plans. Two sets. One has a larger rudder. I built the plane with no rudder and just flew bank and yank. I also included the original plans that I downloaded from http://www.outerzone.co.uk/index.asp.
View attachment Sharkfish Foam Plans.pdf
View attachment Sharkfish Larger Rudder.pdf
View attachment Sharkfish_.pdf
Sorry no flight video.
This one flew on a Hextronic 10g 2000Kv motor with a 5x5 and a 7x5 on a 350mah and a 500mah battery, it was pretty under powered and needed WOT to do any aerobatics.
The I flew it with a Hextronic 24g 1300Kv motor with a 7x5 and a 500mah 3s, it was pretty sporty for being on the heavy side.
I will try it with an Emax 2204 2300Kv motor with a 5x3, 5x5, and 6x3 soon and let you know how that works out.
In the mean time here are the plans. Two sets. One has a larger rudder. I built the plane with no rudder and just flew bank and yank. I also included the original plans that I downloaded from http://www.outerzone.co.uk/index.asp.
View attachment Sharkfish Foam Plans.pdf
View attachment Sharkfish Larger Rudder.pdf
View attachment Sharkfish_.pdf
Last edited:
