Weird issue I've been having with multiple simulators and my Taranis...

[Larocka]

I've been trying to practice fpv flight using simulators, at this point I've tried sevral and I've had the same issue with every last one. Frequently my Taranis will disconnect, causing my aircraft to stop responding (as if it failsafed, last command repeating) for a little while, sometimes i'll regain control, others i wont, i'll have to restart my transmitter and the program.

This has happened with FPV Freerider, DRL simulator, Hotprops, and velocidrone

I've tried it with a full battery on my transmitter, and i also have tried multiple settings (internal tx on and off, master/slave inputs on the model setup)

 

[PsyBorg]

Sounds more like you have a bad connector or a bad wire. Also someone else with usb connection issues found that one of the connectors INSIDE his Taranis was not fully inserted. Once he seated that properly everything worked as it should.

 

[Larocka]

i might have to crack open my taranis then, i've tried multiple usb cables at this point