der_smo
New member
Hi,
I learned to fly on my E-Flite Apprentice S15e but have comfortably built and flown some of FliteTests foam board models since, like the FT Edge. I'ld describe myself as an intermediate flyer without too much aspiration of really getting into aerobatics.
My Apprentice became victim to a mid-air crash with an FPV drone. Instead of trying to repair it, I just took out all the electronics, which was unharmed.
Does anyone have a good suggestion of a good model (ARF or kit) where I can put these components to good use again? The Apprentice was powered by 3 13g servos (and one larger one for the rudder/steering wheel), an 3200mAh LiPo and 30A ESC.
I'm worried more sportive models of similar size will be underpowered, and on the other hand the components may be too heavy for FliteTests "Power Pack C"-sized kits.
I'm not really ready to get into sheet-covered balsa yet (like the Mambo from Old School Model Works) though.
Thanks for your suggestions!
I learned to fly on my E-Flite Apprentice S15e but have comfortably built and flown some of FliteTests foam board models since, like the FT Edge. I'ld describe myself as an intermediate flyer without too much aspiration of really getting into aerobatics.
My Apprentice became victim to a mid-air crash with an FPV drone. Instead of trying to repair it, I just took out all the electronics, which was unharmed.
Does anyone have a good suggestion of a good model (ARF or kit) where I can put these components to good use again? The Apprentice was powered by 3 13g servos (and one larger one for the rudder/steering wheel), an 3200mAh LiPo and 30A ESC.
I'm worried more sportive models of similar size will be underpowered, and on the other hand the components may be too heavy for FliteTests "Power Pack C"-sized kits.
I'm not really ready to get into sheet-covered balsa yet (like the Mambo from Old School Model Works) though.
Thanks for your suggestions!