• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

9xr

  1. J

    Turnigy 9x TX Battery

    For sale is my turnigy tx lipo battery. Used only one charge. No issues I was gifted a new radio and don't need this anymore. Here is the link https://hobbyking.com/en_us/turnigy-2650mah-3s-1c-lipoly-tx-pack-futaba-jr.html I'm looking to get $10 or trades. looking for an 1806 or 2205 for the...
  2. E

    Back on the sticks.

    Hi all, I'm just getting back into flying after a 10 year break. Just bought a Simple Storch and trying to figure out my 9xr after only having flown analog 35 Mhz before. I started off flying SPAD ( simple plastic airplane design) and scratch built all my planes. I have a lot of questions and...
  3. D

    Turinigy 9xr Pro Blue Screen

    So I just got my new Turing 9xr Pro and was messing around with it. I screwed up a few things and couldn't figure out how to fix them, so I figured I would just reset it to factory, so looking around I came across a reset button under the flap with the micro sd card/usb/headphone jack. After...
  4. ericf

    9xr transmitter and orange open lrs for fpv

    Hey everyone, I am doing some research on fpv and I have a question. Is anyone using the turnigy 9xr and orange open lrs module for fpv? Just wondering how reliable everyone thinks it is. I hate to "go cheap" on my radio link, but the price sure is enticing and the 9xr seems favorable. My...
  5. S

    Need Help from the tricopter Gurus!

    Bought all the stuff to build and fly a Bat Bones tricopter. Bought a Turnigy 9XR radio to fly it with. Tried to download Open TX to the radio, and failed miserably. Have an Apple Mac computer, downloaded the Companion 9X software, and the Crosspack AVR software, and tried to download the open...
  6. M

    9XR try copter throttle power curve

    My set up is, 9XR with FrSKY DJT module, FrSKY D8R-2 receiver, and KK2.0 ver.1.6 with a 3 cell LiPo for the battery to power my try copter. I’m looking for help on setting the power curve. I know to do it, what I need is some good #s to put in to make it easier to control for takeoffs...
  7. S

    How do you limit maximum throttle setting? OpenTX/9XR

    Hi, I can't for the life of me figure out how to limit the maximum throttle setting on OpenTX. I want to be able to limit the maximum throttle to limit the maximum Amp draw so that I can stay under the 80% threshold of my motor. I have a watt-meter so know roughly where I want the maximum to...
  8. L

    Restricted motor amperage

    New to the hobby and having trouble setting up my first power system. Doing some bench test with a wattmeter to verify its operation before installing on the plane. I am only getting 10 A from a motor that is capable of handling 40. I have gone through all of the ESC programming options and...
  9. B

    Sim binding problem.

    Hi, I am building my first quad copter and before I put it up in the air I want a simulator to practice on. I downloaded the old version of the heli-x (because it is free) and I have no clue on how to bind my transmitter to it. I am using a 9XR transmitter a windows 8 computer. could you guys...
  10. A

    Turnigy 9XR Binding and servo Jitter

    Hi Guys I am busy with a new project that requires more than 6 channels (500 Airwolf heli with retracts and nav lights). I had a AR7000 laying around, and I went through the binding exercise which worked fine. But when I started setting up the heli I found that the servos has allot of jitter...