bloody wonder

  1. M

    Part Bloody Wonder 3D Printed Power Pod Ver 2.0

    This is a work in progress and I have printed only a few of these. I have it on a couple of sites and just want to share it for anyone building the Bloody wonder or planes that need a power pod. Any suggestions or modifications I can do or if you have a custom configuration just draw me a...
  2. SP0NZ

    Plane Bloody Wonder MkIII 1.3

    Bloody Wonder MkIII Design By: Dan Sponholz Plans By: Dan Sponholz (based on original design by Josh Bixler) BACKGROUND The FT Bloody Wonder was the first plane I really learned to fly RC on. It was not my first plane, but it was the first plane I had success with. For that reason it will...
  3. Innaviation

    Poll: What FT plane do you want speed tested?

    So recently I purchased a GPS tracker to see how fast FT planes fly. So far I have tested the Bloody Wonder at over 60MPH! What FT plane should I test next?
  4. DutchRoll

    FTFC20-Build-Ruary: Main Entry by DutchRoll

    Build Skill: 2, Pilot Skill: 0.75 (Crashed 8 times, max distance 3/4 of a circuit, no landings) FT-Mini Tiny Trainer - Cause my Simple Soarer died before it even lived. Build Photos FT-Mini Corsair - I want a warbird, and I need practice with round fuselages Build Photos FT-Bloody Wonder -...
  5. S

    Bloody Wonder vs Bloody Wonder MKIII?

    What, exactly, are the differences between these two models? Can the BW build video still be used to build the BW MKIII? Which is the better plane in your opinion? Thanks!
  6. L

    Bloody Wonder motor thrust angle

    Hi Guys, I'm just about to install my motor and esc in my first bloody wonder and I'm not sure if I should add down thrust and right thrust to the motor mount. The last planes I built 15 years ago all had a few degrees of down and right so I was wondering if this plane needs it or should I just...
  7. Centus

    Swappable "Blackwing"

    Here is a test flight video of a new swappable design that I've been working on, called "Blackwing". I used SPONZ's Bloody Wonder mk3 fuselage and wing design (with some small modifications) and designed a new tail and canard. Enjoy!
  8. SP0NZ

    Mighty Mini MkIII

    Mighty Mini MkIII - Build MIGHTY MINI MkIII Mighty Mini Sized Bloody Wonder MkIII Baby Baron next to the Mighty Mini MkIII DETAILS This is my second Mighty Mini sized plane. It uses the same power setup as the FT Mighty Mini series, and can use the same power pod as the Mini Scout and...
  9. R

    Bloody Wonder vs Blood Baron

    I would loves to see a dog fight episode where you have at least 2 of each in a streamer cut then fight to the death.
  10. W

    Fast bat 3.5

    Here a little something ive been working on. Hope you enjoyed
  11. S

    FT Bloody Wonder, Bloody wonder MKIII, Bloody Baron, Ugly Wonder? Which is best?

    Hey everyone, This summer, I want to build a bloody wonder, as I think it's a good next step and the plane is simply awesome. However, there seem to be different versions of the plane. The ugly wonder just came out , and it looks pretty badass. Which do you think is best? My requirements: It...
  12. D

    First scratch build - Bloody Wonder V2

    This is my Grandson holding our almost completed Bloody Wonder. I let him pick out the colored tape! This is my first scratch build. I have to finish the electronics and attach the fins. How does one secure the screw attaching the linkage stopper to the servo arm? Thanks for everything! Don
  13. R

    Upside down rudders on Bloody Wonder

    I'm thinking I cannot possibly be the first person to ever do this, but, in a rush to keep the hot glue from becoming set, I accidentally put the first rudder fin on my first build, the FT Bloody Wonder, on upside down. Because I knew it would be a huge mess and a pain to undo, I just put the...
  14. G

    FT Bloody Wonder Weight Question

    Hi everyone, I am going to scratch build a Bloody Wonder out of Dollar Tree Foamboard, and I am wondering if covering the entire plane in packing tape or extreme packing tape so I could do combat would add too much weight? I will be using Flite Test's Power Pack C with a 3S 2200mah lipo.
  15. kah00na

    Mini Bloody Wonder (50%)

    I'm excited to see what the FliteTest guys do soon with their mini foam airplanes! In the mean time, I built a 50% sized FT Bloody Wonder! I used an extra RCX 2400kv motor, 12 amp Afro ESC, and 2 extra 9g servos I had laying around. It is too dark tonight to try to fly it but I'm hoping to...
  16. T

    Mini Flite Test Planes

    Recently I have been obsessed with smaller planes and decided to try and make some scaled down FT planes. The smaller ones seem to be a tad bit harder to fly than the bigger ones, and take more tweaking, but it is totally worth it when they are done. Some of the advantages of smaller planes are...
  17. T

    200% Bloody Wonder!

    I went to Flite Fest this year and saw a lot or really cool scratch builds. One of my favorites was a 200% Bloody Wonder. It looked so awesome and looked like it flew amazing. When I got back from Flite Fest, I decided to make one. It only took 5 shees of foam and took about 5 hours to build. I...
  18. K

    need help with a bloody wonder build

    I built the bloody wonder last night and I had an issue the rear fuselage was not notched out where it fits to the front fuselage like in the video. Do I have bad or old pdf?
  19. C

    FT Bloody Wonder with Skis

    I completed my first scratch build a few days ago and couldn't be happier with its performance. The only thing i don't enjoy is landing. It seems no matter what I do the plane likes to tip forward on its wheels planting the prop in the grass and breaking the blade. After trying moving the...
  20. stay-fun

    Symmetrical wing Bloody Wonder

    Hi guys! Here's my version, my modification to the Bloody Wonder! I've had a couple of planes, but the bloody wonder is the one I liked most of all of them! There were only 2 things I needed to change: I wanted a rudder, and a symmetrical wing. The rudder mod is already on this forum, and I've...