Menu
What's new
By:
Advanced search…

fs-i6

  1. L

    Channel 5 fs-i6

    Hi everyone, I'm new to the world of RC planes. I'm trying to configure my first plane, but I'm having a problem. I would like to use Channel 5 to move the elevator with the right stick (so up and down) except that it is connected to channel2. Which is already used for fins. I don't know how to...
  2. L

    Solved FS-i6 V-Tail mixing

    I'm trying to set up a Durafly Bonanza with my TGY-i6 (identical to the FS-i6, so I'll just call it that) so I turned on the v-tail mixing, but it's backwards, up and down movement controls the rudder and left and right controls the elevators. There is no option to reverse this and I'm flying...
  3. S

    FS-i6s | Vector Thrust | FT Twin Sparrow

    Hey everyone! I need a hand with programming my transmitter for use with the FT Twin Sparrow. I already managed to program the rear V-Tail servos correctly, and now all I need to do is set it up for vector thrust. I am using the FlySky FS-i6s with the FS-i6b receiver. I have used both models...
  4. H

    TGY-i6 Custom painting.

    I recently had a crack at painting my Tx because it's relatively cheap and there wasn't much to lose. Not really happy with the end result, the front is really quite bad but the back looks nice, thought I'd post pics anyway. I sprayed 2 coats with gloss white and 2 coats of clear to finish it...
  5. Fuzzy Whumpkin

    Flysky FS-i6 Custom Paint

    I repainted my FS-i6 over the weekend, and thought i'd post pics:) I used Rustoleum flat grey primer, Rustoleum Flat Black Primer, and Rustoleum Textured somethin-r-other the only real modification i made was to file down the power button and gorrila glue some 60-grit sandpaper to it...
  6. Zoszko

    CC3D - 250 Drifts away

    Hello everyone! I have just built my 250 FPV today, it was quite easy and straigth forward. It came with a CC3D, I have followed the wizzard and configured it. It does fly but I am having problems with it staying in place. Once I give it enough throttle to lift off it will start moving to the...
  7. P

    FlySky/Turnigy i6 Programming tips...

    The Flysky/Turnigy i6 has a few quirks in its menu system. Thought I'd share the few I have found This applies to Firmware version 1.1 9-Jan-2015 running on a Turnigy TGY-i6. 1. The TX displays the currently selected model's Information screen. A long press "OK" gets you to the programming...