• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

guinea

  1. P

    Guinea Pig, addicted to FT planes :)

    New guy here. Been out of the hobby for a while. Purchased a Eflite mini-apprentice for the kids last Christmas, now we are building FT plans...like crazy Just needs to electronics (I am taking the SAFE system out of the apprentice and using dx6) installed. Mods: 1. Cargo door is not...
  2. C

    Float Mini Guinea

    Hello all! I know there have been some of you wishing someone built a float Mini Guinea, since it would look like a Sea Otter, and would just be awesome! Well, I have done it. Please pardon the poor look of my plane, as I crash often, and am not worried about aesthetics so long as the thing...
  3. S

    Mini Guinea motor issue!

    Hey guys I need some technical advice. the build for my guinea is complete and all electronics are working fine but one of the motors spins up a little slower than the other and is causing yaw. this is my first twin so I guess it's something basic. set up 2x 12 amp esc 2x 1806 A pack motors...
  4. D

    mini problems

    Ive finished building my mini guinea with the corresponding power pack. I connected all of the servos correctly and connected the second motor to the AUX1 channel on my reliever(spektrum a610). I connect the battery and the esc connected to AUX1 beeps in a pattern like its going through its...
  5. jaskoller

    FT Guinea Pig Wiring Battery

    Currently building the FT Guinea. I'm curious what other people have done on the power/wiring. Has anyone run separate batteries for each ESC? If so, how did you do that? I have some ideas, but wanted to see what the community does. I'm assuming most people just run one battery. Please let...
  6. S

    Jittering Emax MT1806 2280kv Motor

    Hello Flitetest Forum Members, as I am a total NOOB to scratch building, I have come across a problem in my first build(mini guinea). One of my motors starts to jitter every now and then, and then takes about a good 10 seconds to correct itself. I have checked to make sure it is not the esc, the...
  7. S

    NTM 2830 1200kv for Bloody Baron and Guinea Pig? Are those right? And which props?

    Hey everyone, I have asked questions like this before, but I am still not quite certain about what I should get. I want a hobbyking motor for my Bloody Baron that I will be able to use on the Guinea Pig (together with a second one) later on. The NTM 28-26A 1200kv seems to be just a little...
  8. S

    NTM 28-26A motors for Guinea Pig?

    Hey everyone, In a month or so, I am going to build the Bloody Baron. I will use the NTM 28-26A 1200kv motor for that. It would be nice if I could just buy another one (and another ESC) to power the Guinea Pig that I would really like to build this winter. However, I am kind of having trouble...
  9. F

    Guinea Pig -500 Series

    Finished Guinea Pig but I added more candy bombing space per my kids request so the -500 series. I added 5 inches of cabin to allow a little more cargo capacity for other experiments. I also rigged the door to open and close and will add that to the pictures later. No gear saves weight and I...
  10. B

    FT Guinea Pig

    I don't have the time to build the plane but I'm in loveeeee with it. Will anyone be willing to build one for me? If so, give me a price and I'll give you my number.