• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

plans

  1. flitetest

    Plane FT Flying Christmas Trees 1.0

    Description: Foam board flying Christmas trees available in two different sizes. Josh Bixler designed the small version for use with the FT 1806 (A Pack) motor and a 650-800 mAh 3S LiPo battery. David Jester designed the large version for use with the FT 2212 (B Pack) motor and a 1300 mAh 3S...
  2. SP0NZ

    Plane Foam Wonder "Racer" 1.0

    Foam Wonder The "Racer" Based on the original balsa wood design by Bruce Tharpe Racer concept inspired by Tony Lewis Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model that was designed by Bruce Tharpe in the...
  3. vhandon

    Plane Vultee XP-54 Swoose Goose 1

    Specifications: Wingspan: 42” Length: 40” Flying weight: 22 oz Electronics: C-Pack Battery: 2200 mAh 3S LiPo 4 sheets of FT or DT Foam Board
  4. SP0NZ

    Plane Bloody Rascal 1.0

    Bloody Rascal Based on the FT Bloody Baron and SideWinder designed by Dan Sponholz Design by: Justin Boetsma Plans by: Dan Sponholz This plane came from two places. One was to find a happy middle ground between the swappable Bloody Baron and the built-like-a-tank SideWinder. The power pod was...
  5. SP0NZ

    Plane Foam Wonder "Angel" 1.0

    Foam Wonder The "Angel" Based on the original balsa wood design by Bruce Tharpe Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model that was designed by Bruce Tharpe in the early 90's and kitted by Sig...
  6. SP0NZ

    Plane Foam Wonder "Patriot" 1.0

    Foam Wonder The "Patriot" Based on the original balsa wood design by Bruce Tharpe Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model that was designed by Bruce Tharpe in the early 90's and kitted by Sig...
  7. SP0NZ

    Plane Foam Wonder "German" 1.0

    Foam Wonder * The "German" Based on the original balsa wood design by Bruce Tharpe * The German variant is not one of the original designs included with the kit Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model...
  8. SP0NZ

    Plane Foam Wonder "Russian" 1.0

    Foam Wonder The "Russian" Based on the original balsa wood design by Bruce Tharpe Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model that was designed by Bruce Tharpe in the early 90's and kitted by Sig...
  9. SP0NZ

    Plane Foam Wonder "Standard" 1.0

    Foam Wonder The "Standard" Based on the original balsa wood design by Bruce Tharpe Foam Board Conversion by: Dan Sponholz Plans by: Dan Sponholz The Sig Wonder is a classic balsa wood and plywood, gas powered model that was designed by Bruce Tharpe in the early 90's and kitted by Sig...
  10. Matthewdupreez

    Bushhawk RC Looking for Beta Builders

    Hey guys, BushHawk RC is looking for beta builders for various planes. Please look through the list below, and pm me with the ones you want to beta test for me 😁. I would really appreciate it. Piper Cherokee Arrow: Wingspan 822mm Length: 613mm Weight: 400- 600 grams Flying Characteristics...
  11. Noel Gillett

    FT Mini Sparrow - Destiny Sparrow Racing League Skin

    Recently, I have been a fan of the video game, Destiny 2 even though I have never played Destiny 1 before. Of course, I am an advocate of aeronautics and RC Airplanes as well. When doing some research about what Destiny 1 was like a few weeks ago, I stumbled upon the seasonal event, "Sparrow...
  12. JakeTheSloth

    1:6 scale Fokker D.VI & Aviatik Berg D.I "Dawn Patrol" challenge

    Hello everyone I just want to share the plans I made off a paper model for said Fokker and Aviatik Berg. The fokker is already in 1:6 scale for Dawn Patrol requirements, with my "instructions" written on plans, it's not a build for someone new but it's rather simple and fit is pretty good. The...
  13. SP0NZ

    Plane Ugly Wonder 1.0

    Ugly Wonder Design By: Dan Sponholz Plans By: Dan Sponholz Desciption The Ugly Wonder is another variation of the FT Bloody Wonder. If you have read the build thread or the article for the Bloody Wonder MkIII, you probably already know that I'm a huge Bloody Wonder fan. I have built, flown...
  14. SP0NZ

    Plane Bloody Wonder MkIII 1.3

    Bloody Wonder MkIII Design By: Dan Sponholz Plans By: Dan Sponholz (based on original design by Josh Bixler) BACKGROUND The FT Bloody Wonder was the first plane I really learned to fly RC on. It was not my first plane, but it was the first plane I had success with. For that reason it will...
  15. flitetest

    Plane FT Simple Scout XL 1.5

    FT Simple Scout XL Designed By: Josh Bixler and Dan Sponholz Plans By: Dan Sponholz Firewall STL : https://forum.flitetest.com/index.php?resources/ft-scout-xl-firewall.290/ Gear Plate STL: https://forum.flitetest.com/index.php?resources/ft-scout-xl-gear-plate.291/
  16. Addicted

    Get Your FLERKEN Plans!

    You can purchase the FLERKEN PLANS on the FTCA Portal, now! Get 'em while they're hot!
  17. Addicted

    New FTCA Member Portal! (2/11/22)

    The NEW FTCA Member Portal is up and running! After you log in and set your password, you can see FTCA news/events, check your perks/discounts, buy downloadable plans, print your FTCA Member Certificate, etc. Have you checked it out? What do you think about the portal? FTCA Portal
  18. flitetest

    Plane FT Baby Blender 2.1

    FT Baby Blender Designed By: Josh Bixler Plans By: Dan Sponholz Description: The Baby Blender Swappable is an excellent transition into four channel flying and more advanced building techniques. With gentle stall characteristics and a wide speed envelope, the Baby Blender will enable you...
  19. Jesse Dupreez

    Glider plans

    Does anyone have balsa glider plans that i can use to turn into foam plans? I will make it 1m wing span and use a f pack motor on it And i want to try out fusion 360
  20. Jesse Dupreez

    Heinkel he 60

    Hi guys here is my build thread for the heinkel he 60, i got a front, top and side view of the internet and am using gimp i will use the se5's wing