So it has been a while sense i posted so here is what i got. I am building a delta 3d printer. I have finished the printer frame and am just starting on the gantry carts and motors. Here is a picture of the printer so far, their is a 36" ruler on the left of the printer for scale.
View attachment 146303
Here are the electronics i am planning to use, please let me know if you see anything wrong or see anything that you think won't work well.
Hotend-
https://e3d-online.com/v6-all-metal-hotend
I am upgrading it with this-
https://e3d-online.com/volcano-upgrade-kit
What type of nozzle should i get? Does it matter at all what material it is or...
https://e3d-online.com/nozzles-for-3d-printer/volcano-nozzles
Extruder-
https://e3d-online.com/titan-extruder
Here is where I am getting confusing
https://www.aliexpress.com/item/32980090169.html?spm=a2g0o.cart.0.0.1de93c00WmQLOR&mp=1This is the board i am gonna get, so does it come with drivers? Do i need drivers? If so which option do i need to choose for it to come with drivers that will work with these motors:
https://www.oyostepper.com/category-6-b0-Nema-17-Stepper-Motor.html
Are those motors good quality motors? Would this screen work with it?
https://www.amazon.com/dp/BIGTREETEC/?tag=lstir-20
Thanks, i am sure i will have more questions but thank you!