Eclipson Go 1 Wolf G code, not showing up

[alan0043]

Hi Everyone,

I need some help. I am a rookie when it comes to 3D printing. I want to 3D print the Eclipson Go 1 Wolf (it's a free plane from Eclipson). I think it is a cool looking plane. But I have never 3D printed anything that had the G codes already for you in a folder. I was able to unzip the folder that I got from Eclipson. The printer that I am using is an Ender 3V2. I also use the Creality slicer for STL files that I get from Thingiverse. When I slice a STL file, lets say I am working on a Benchy. The G code file will look like this on my micro sd card. CEV2_3D Benchy Type: GCODE. Here is were it gets interesting. When I down load a file from the unzipped folder, lets use the Pilot as an example. It will show up on the micro sd card as, Pilot Type: 3D Object. There is no G code showing up for the Pilot. The 3D printer does not even show the file of the Pilot on it's screen for objects to print. I understood that the files for the Go 1 Wolf were already sliced and ready for 3D printing. What am I missing ? Can someone point me in the right direction.

I am open to all advice,
Al

 

[tomlogan1]

Here is what I see. Follow the screens 1 - 3

 

[tomlogan1]

This is directly from the extracted zip file from Eclipson.

 

[alan0043]

This is directly from the extracted zip file from Eclipson.

Hi tomlogan,

Thank you again for the great help. Your post of the screens from the unzipped files was a big help. I seemed that I was a few clicks away from getting the correct files. I double clicked on the G-code folder and then double clicked on the PLA folder. And long and behold, I have the G-codes that I need.

Thank you again,
Al

 

[alan0043]

Hi Everyone,

I have a little update. I have a pilot for the plane. I had success with some of the parts for the Go 1 Wolf. I was able to print out the pilot, pillow, and motor holder but had trouble with spinner 1 & 2. The spinner print wanted to start printing in the upper right hand corner of the bed. I wasn't expecting that. I thought the spinner would start printing in the center of the bed just like the other parts. Time to keep moving forward.

A Big Thank You to ' tomlogan ' for his help,
Al