Admiral 600SP No Motor Power

[Cobra1365]

Building the Cessna 337 and tried to power things up yesterday. Binding went OK for servos. But, motors won’t power up. Tried throttle calibration, nothing. I don’t get the normal beeps at all. Checked all the power connections and they’re tight. DX 8 Gen 2. Emax GT 2215/09 motors. These are the ESCs I used (Email sent to seller)...https://www.amazon.com/dp/B071GRSFBD/?tag=lstir-20

thoughts?

 

[Cobra1365]

Solved. Idiot behind build!

 

[slowjo]

Solved. Idiot behind build!

soooo what was it

 

[Cobra1365]

Since it’s an in-line twin, I had to run the two ESCs in parallel. This required an extension from rear ESC. Although I made sure they were tight, I didn’t notice that wire was reversed and the plug was not making connection. Swapped it around and ran the trim all the way down again. Powered right up!

 

[slowjo]

Since it’s an in-line twin, I had to run the two ESCs in parallel. This required an extension from rear ESC. Although I made sure they were tight, I didn’t notice that wire was reversed and the plug was not making connection. Swapped it around and ran the trim all the way down again. Powered right up!