DutchRC
Member
Hi there people!
I've been wanting to scratch-build a quad for quite a while now.. Partly to show others it's not hard to do and/or expensive.. After a while I had some ideas for the quad, and tonight I got the project started
Here is my project kick-off.. In which I will show the basic shape / idea:
I'll put a list of the parts used in the video-description of the video's.. But here is a list as well:
Parts used:
Motors: D2826-6 2200kv *
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=12919
ESC's: HobbyWing X-Rotor 20A OPTO *
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=73086
Flight controller: KK2.1HC *
http://hobbyking.com/hobbyking/store/__39791__Hobbyking_KK2_1HC_Multi_Rotor_Hard_Case_F light_Control_Board_With_Remote_Programmer.html
Lipo: ??
If you are left thinking: 'this will NOT work!' .. please let me know!
I've been wanting to scratch-build a quad for quite a while now.. Partly to show others it's not hard to do and/or expensive.. After a while I had some ideas for the quad, and tonight I got the project started
Here is my project kick-off.. In which I will show the basic shape / idea:
I'll put a list of the parts used in the video-description of the video's.. But here is a list as well:
Parts used:
Motors: D2826-6 2200kv *
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=12919
ESC's: HobbyWing X-Rotor 20A OPTO *
http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=73086
Flight controller: KK2.1HC *
http://hobbyking.com/hobbyking/store/__39791__Hobbyking_KK2_1HC_Multi_Rotor_Hard_Case_F light_Control_Board_With_Remote_Programmer.html
Lipo: ??
If you are left thinking: 'this will NOT work!' .. please let me know!