Curving foam with no paper laminate

[Matthewdupreez]

If you use Depron, I used the the heat from a 180 degree hot water system where I bent the shape of the Shuttle around the pipe in the cellar. You got to go slow and make sure it's heated before you bend it further (2 cracked trying it bend it too fast). I also have done it with the blue foam real easy.
View attachment 216463

awesome thanks

 

[cyclone3350]

I built this thing with DTFB paper removed. https://forum.flitetest.com/index.php?threads/new-to-ft-my-stuff.66655/page-3#post-649897 I didn't do much in details on the build. I cut the parts out first with the paper on. Then I used a tea kettle to steam spout the paper off. By clamping open the spout, I waved the parts back & forth over the steam & started the process of peeling back the paper. U will find that will curve it like nobody's business. With both sides of the paper removed, I found this foam to be very soft & pliable. For this project I didn't need to bend the foam, I just want the paper off so I can try something new to cover it with.