Electric Versa

Here are a few pics of my latest foam board project(s). A motorized Versa and a scratch built high wing. I use internal 3D printed ribs to smooth out the airfoils in my foam board wings. And I developed a 3D printed servo mount specifically for foam board installations. The servo mount is customized for MG90 servos and provides an easily removable installation for maintenance. The servo arm extends out the bottom surface of the wing from the flush mount.
 

Attachments

  • 472900229_9535453069800923_3821799538871575100_n.jpg
    472900229_9535453069800923_3821799538871575100_n.jpg
    27.4 KB · Views: 0
  • 473334462_9535454306467466_3568470841610590360_n.jpg
    473334462_9535454306467466_3568470841610590360_n.jpg
    808.9 KB · Views: 0
  • 474087075_9535453553134208_5124907711614822414_n.jpg
    474087075_9535453553134208_5124907711614822414_n.jpg
    803.2 KB · Views: 0
  • 474088005_9535453343134229_6059856185988271757_n.jpg
    474088005_9535453343134229_6059856185988271757_n.jpg
    518.3 KB · Views: 0
  • 473383628_9535454089800821_5870464365222111381_n.jpg
    473383628_9535454089800821_5870464365222111381_n.jpg
    413.3 KB · Views: 0
  • 474026795_9535454723134091_7132500552125994042_n.jpg
    474026795_9535454723134091_7132500552125994042_n.jpg
    404.6 KB · Views: 0
  • 472763903_9535454546467442_2786165407052310513_n.jpg
    472763903_9535454546467442_2786165407052310513_n.jpg
    355.9 KB · Views: 0