prachar223
Junior Member
Hello all,*
I am selling a "Plug in Fly" version of the Flitetest Batbones Tricopter. I will cover shipping to lower 48 states. Price is $225, Inc shipping. I have over $300 invested in it.*
The motors have less than 1 hour flight time on them. Never has been crashed. All you need is a receiver/transmitter, battery, fpv gear and your good to fly. I flew this with a gopro hero 2 and a 3s 3300mah battery and it did great.*
This has the original flitetest tilt mechanism not the tough tilt. I never had issues with it so I did not upgrade.
Also the kk2.1 board has been upgraded with steevis firmware.*
Here are the details:
Bat Bones Tricopter w/ Gopro camera mount (includes anti vibration Kyosho gel)
> -KK 2.1 flight controller
> -SimonK NextLevel 20amp ESC's
> -Emax multi copter version motors 2213-935kv
> -APC 10x4.7 brand new props
> -Futaba MG S3156 tail servo- metal geared
> - 2 rows of very bright blue and Amber LEDs on bottom of the camera mount to aid in-flight orientation
> - XT-60 wire harness has pos/neg wires for fpv setup
> - includes Gopro video out cable works for gopro 2 only
If you want anymore info please let me know. PayPal only.
I am selling a "Plug in Fly" version of the Flitetest Batbones Tricopter. I will cover shipping to lower 48 states. Price is $225, Inc shipping. I have over $300 invested in it.*
The motors have less than 1 hour flight time on them. Never has been crashed. All you need is a receiver/transmitter, battery, fpv gear and your good to fly. I flew this with a gopro hero 2 and a 3s 3300mah battery and it did great.*
This has the original flitetest tilt mechanism not the tough tilt. I never had issues with it so I did not upgrade.
Also the kk2.1 board has been upgraded with steevis firmware.*
Here are the details:
Bat Bones Tricopter w/ Gopro camera mount (includes anti vibration Kyosho gel)
> -KK 2.1 flight controller
> -SimonK NextLevel 20amp ESC's
> -Emax multi copter version motors 2213-935kv
> -APC 10x4.7 brand new props
> -Futaba MG S3156 tail servo- metal geared
> - 2 rows of very bright blue and Amber LEDs on bottom of the camera mount to aid in-flight orientation
> - XT-60 wire harness has pos/neg wires for fpv setup
> - includes Gopro video out cable works for gopro 2 only
If you want anymore info please let me know. PayPal only.