mrstamp80
New member
Ok, after my wife took all the tax money (anyone who is married understands what i mean by this) for all the various projects around the house, I managed to get a few left over bucks. I decided to build a 250 quad on a budget. Just a background I currently have a nano qx, fpv nano qx, and a scratch built T copter. (thanks so much with the help on that) and fpv gear. So flying a 250 shouldn't be a issue.
I already ordered the motors and esc's .
2 Emax 2204 MT2300kv cw
2 Emax 2204 MT2300kv ccw
4 Emax Simon series 12a esc
I already have a Naze32 fcb board.
Fat shark 250mw tx, fatshark 600tvl camera, and a GoPro 3 white.
So i need a frame. There are so many out there and my frame budget is $50. Keep in mind i am just going to use and abuse it. I will not be in any type of formal racing with others. Just my own personal fun and as long as it flies good I will be *****.
Here is what i have been looking at:
http://www.buddyrc.com/spedix-s250-multirotor-frame.html I can't find much more info about it seems to be new.
http://www.buddyrc.com/zmr-250-full-carbon-fiber-quadcopter-frame.html Seems to be a popular choice, that i have read.
http://www.buddyrc.com/zmr-250-composite-carbon-fiber-quadcopter-frame.html I know it's not FULL carbon, but didn't know if that really matters.
I am not dead set on these frames, I am open to other options.
Lastly props 5x3 or 5x3x3 or just go 6x3? As far as batt's go I have a couple 1300 3s 35c laying around. I know i need to get a higher c rating. I will get those later.
Thanks for everyone's help.
I already ordered the motors and esc's .
2 Emax 2204 MT2300kv cw
2 Emax 2204 MT2300kv ccw
4 Emax Simon series 12a esc
I already have a Naze32 fcb board.
Fat shark 250mw tx, fatshark 600tvl camera, and a GoPro 3 white.
So i need a frame. There are so many out there and my frame budget is $50. Keep in mind i am just going to use and abuse it. I will not be in any type of formal racing with others. Just my own personal fun and as long as it flies good I will be *****.
Here is what i have been looking at:
http://www.buddyrc.com/spedix-s250-multirotor-frame.html I can't find much more info about it seems to be new.
http://www.buddyrc.com/zmr-250-full-carbon-fiber-quadcopter-frame.html Seems to be a popular choice, that i have read.
http://www.buddyrc.com/zmr-250-composite-carbon-fiber-quadcopter-frame.html I know it's not FULL carbon, but didn't know if that really matters.
I am not dead set on these frames, I am open to other options.
Lastly props 5x3 or 5x3x3 or just go 6x3? As far as batt's go I have a couple 1300 3s 35c laying around. I know i need to get a higher c rating. I will get those later.
Thanks for everyone's help.