Good quality fpv camera and goggles

[beardlesslumberjack]

I've never set up an fpv rig before, but i've used an eachine tx03 + their basic goggles. I wanted to get a higher quality all in one so that the video quality and resolution would be better and more enjoyable for fixed wing flying outside. Any suggestions?

 

[PsyBorg]

The AIO quality is always going to be less then a separate camera / vtx due to cost in manufacturing. They usually do not have an accessible bios where you can change settings. SOME have presets but all have very poor light management.

 

[beardlesslumberjack]

@PsyBorg thanks for the warning, do you have any recommendations for parts/goggles that are mid range?

 

[PsyBorg]

My go to FPV setup is the Skyzone 02c goggles and usually use panda rc vtx with runcam microswift 2's

this is the set up BEFORE I did any camera adjustments and the goggles were only a day or two old.