AltitudeProductions
Member
When I started flying my H quad I was practicing flying facing towards myself. When I used yaw the M1 shut down and the quad crashed. Whenever I increased the throttle m1 would shut off. Now whenever I fly it at all the m1 first acts like it is burnt out and shakes and when it does spin up and take off it immediately shuts down again and crashes. I've tried 2 different motors, increasing the motor cut off, recalibrating the escs, and reprogramming the escs. I am using 4 different types of motors. M1 - Gforce 2212 900kv M2 - Park 400 720kv M3 - DJI replacement motor 920kv M4 - Super Tigre .10 1250kv
Skip to 3:27 and 3:58
More specs:
Gforce 2200mah battery
Skywalker 20A escs
Orange RX
10x4.5 props
Skip to 3:27 and 3:58
More specs:
Gforce 2200mah battery
Skywalker 20A escs
Orange RX
10x4.5 props