I have a mini vapor reciever...What to build.

[510thousandths]

I have a Mini Vapor receiver and motor (no gearbox), someone point me in a direction of something to build with it.

Depron, balsa and tissue, just looking for ideas or plans to do with this!

 

[Stradawhovious]

I will be watching this thread closely... I have the guts from a micro Trojan I was thinking about putting into a slow flying guillows trainer.

 

[Capt_Beavis]

I am not sure about the vapor but, what about this Strad?

https://www.youtube.com/watch?v=sJTo-N8X-58

 

[510thousandths]

Just tested the rx and it does support elevon mixing, I wonder how big a motor I can put on this. I have some coreless motors from the nano qx or from a syma s107g.

 

[Stradawhovious]

I am not sure about the vapor but, what about this Strad?

https://www.youtube.com/watch?v=sJTo-N8X-58

That thing is really adorable... Thanks for the link! I was looking at more of a slow flying trainer for indoors...

That said, I think I found it.

http://www.mountainmodels.com/produ...d=709&osCsid=cc4cdee2e8853efb704fba1d832ed7d0

Sorry to hijack the thread! Thanks for allowing me to hitchike!

 

[510thousandths]

Well, i might try and make a powered glider...i said try...

Anyhow, a very bad picture of some wings...


Span is just under 24" (each wing panel is 12") Maybe a motor pod above the wings with a nano qx motor and prop? Don't know.

 

[510thousandths]

Well, here is my attempt for now...weighing in at 22gr with a span of almost 24"
It is dark and windy, so no attempt to maiden it tonight.

 

[Stradawhovious]

Nice! I look forward to the updates!

 

[Christopher14]

Me to.

 

[510thousandths]

Way to windy today! I don't have enough room indoor to test fly it. I do hope I get a chance before NEFF this weekend.

 

[dutchmonkey]

here is a mini dlg with a VL911 heli brick in it